Reducer motor terminal refers to the integration of deceleration motor. The integrator is also commonly known as gear reducer motor and is usually assembled by professional reducer manufacturers. Reducer motor terminals are widely used in steel industry, machinery industry etc., is a popular miniature reducer motor terminal in the 21st century. The advantages are simplified design, space saving, power and reduction ratio, torque does not decrease. The motor terminal of reduction motor is usually through the motor, internal combustion engine or other high-speed power equipment, and the torque reduction effect is achieved by using gear combinations of different internal sizes.

一,、Difference between reducer motor terminals and ordinary motor terminals

1. Check whether there is a gear reducer

Generally speaking, it is a through shaft. All parts are surrounded. Power is transmitted directly to the engine ring gear. There are no bearings in the front and rear, only copper sleeves. The deceleration motor is divided into two parts. The rear end is the motor and the front end is the planetary reduction mechanism. Needle roller bearings and single groove ball bearings are adopted. The service life of reduction motor is longer than that of ordinary motor. The reduction motor is small with a low current requirement.

The reduction motor is usually ordinary DC motor, but a gear reducer is added in front of the ordinary motor. Reducer is generally used for low-speed and high torque transmission equipment. Motor internal combustion engine or other high-speed power can achieve the purpose of deceleration by meshing the input shaft gear of the reducer with the output shaft gear. The ordinary reducer will have several pairs of gears with the same principle to achieve the desired deceleration effect.

二,、Characteristics of reducer motor terminals

1. The reduction motor terminal is manufactured in combination with international technical requirements, with high scientific and technological content.
   
   

2. Space saving, reliable and durable, high bearing capacity, and the power can reach more than 95kw.
   

   
   

3. Low energy consumption, superior performance, and the efficiency of the reducer is more than 95%.
   

   
   

4. Low vibration, low noise and high energy saving. It adopts high-quality section steel material, steel cast iron box, and the gear surface is subject to high-frequency heat treatment.
   

   
   

5. After precision machining, the positioning accuracy is ensured. The gear reduction motor constituting the gear transmission assembly is equipped with various motors, forming electromechanical integration and fully ensuring the quality characteristics of the product.
   

   
   

6. The motor terminal products adopt a series of modular design concepts and have wide adaptability. This series of products are machine combination. The installation position and structure scheme can choose any speed and various structure forms according to the actual needs.